Network Working Group                                           J. Touch
Internet Draft
Request for Comments: 5385                                       USC/ISI
Intended status: Informational                             July 8,
Obsoletes: 3285                                             December 2008
Expires: January 2009
Category: Informational

                  Version 2.0 Microsoft Word Template
                 for Creating Internet Drafts and RFCs
                  draft-touch-msword-template-v2.0-07.txt

Status of this This Memo

   By submitting this Internet-Draft, each author represents that

   This memo provides information for the Internet community.  It does
   not specify an Internet standard of any applicable patent or other IPR claims kind.  Distribution of which he or she this
   memo is
   aware have been or will be disclosed, and unlimited.

IESG Note

   This RFC is not a candidate for any level of which he or she
   becomes aware will be disclosed, in accordance with Section 6 of
   BCP 79.

   Internet-Drafts are working documents Internet Standard.  The
   IETF disclaims any knowledge of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum fitness of six months
   and may be updated, replaced, or obsoleted by other documents at this RFC for any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or
   purpose and notes that the decision to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt publish is not based on IETF
   review apart from IESG review for conflict with IETF work.  The list of Internet-Draft Shadow Directories can be accessed RFC
   Editor has chosen to publish this document at
   http://www.ietf.org/shadow.html

   This Internet-Draft will expire on January 8, 2009. its discretion.  See
   RFC 3932 for more information.

Abstract

   This document describes the properties and use of a revised Microsoft
   Word template (.dot) for writing Internet Drafts and RFCs.  It updates
   replaces the initial template described in RFC 3285 to more fully
   support Word's outline modes and to be easier to use.  This template
   can be direct-printed and direct-viewed, where either is line-for-line line-for-
   line identical with RFC Editor-compliant ASCII output.  This version is
   intended as an update to RFC3285.
   obsoletes RFC 3285.

   The most recent version of this template and post-processing scripts
   are available at http://www.isi.edu/touch/tools http://www.isi.edu/touch/tools.

Table of Contents

   1. Introduction...................................................2 Introduction ....................................................3
   2. Use............................................................3 Use .............................................................3
      2.1. Setting up your version Your Version of Word to edit RFCs..............4 Edit RFCs ...............4
      2.2. Editing...................................................4 Editing ....................................................4
      2.3. Saving the File...........................................6 File ............................................6
      2.4. Generating Output.........................................6 Output ..........................................6
           2.4.1. Printing Direct to a Printer.........................6 Printer ........................6
           2.4.2. Printing the Text File...............................7 File ..............................6
           2.4.3. XML Support..........................................7 Support .........................................7
   3. Changes from RFC 3285..........................................7 3285 ...........................................7
      3.1. Heading Styles............................................8 Styles .............................................7
      3.2. References Style..........................................8 Style ...........................................8
      3.3. Boilerplate...............................................9 Boilerplate ................................................9
      3.4. Simplification............................................9 Simplification .............................................9
      3.5. Ability to direct print Direct Print and direct view...................9 Direct View ....................9
   4. Compatibility Issues..........................................10 Issues ...........................................10
   5. Security Considerations.......................................10 Considerations ........................................10
   6. IANA Considerations...........................................10
   7. Acknowledgments...............................................10
   APPENDIX A: Acknowledgments ................................................10
   Appendix A. Template configuration details.......................11 Configuration Details ........................11
      A.1. Configure................................................11
      A.2. Configure styles.........................................11
         A.2.1. Styles ..........................................11
           A.1.1. Redefine existing styles............................11
         A.2.2. Existing Styles ...........................11
           A.1.2. Add new styles......................................12
         A.2.3. New Styles .....................................12
           A.1.3. Hidden styles:......................................13
      A.3. Styles ......................................13
      A.2. Define page layout.......................................13
      A.4. Page Layout ........................................13
      A.3. Insert boilerplate.......................................14
      A.5. Boilerplate ........................................14
      A.4. Automatic fields.........................................15
   APPENDIX B: Post-processor script (perl).........................17
   8. References....................................................21
      8.1. Normative References.....................................21
      8.2. Informative References...................................21
   Author's Addresses...............................................21
   Intellectual Property Statement..................................22 Fields ..........................................15
   Appendix B. Post-Processor Script (Perl) ..........................16

1.  Introduction

   Internet Drafts and RFCs are predominantly written in embedded-text embedded-text,
   compile-based formatting systems [1][4][5].  The primary and first
   such system is NROFF, a text formatting text-formatting utility based on manual entry
   of embedded configuration commands, such as ".p" for new paragraphs.
   XML is a more recent alternative that uses structure tags instead of
   explicit formatting commands to allow a single file (.xml) to be
   'compiled' into ASCII output, HTML, or a variety of other formats as
   desired [7].

   Although XML adds more modern semantic information to the structure
   tags, neither system supports modern WYSIWYG (what you see is what
   you get) (what-you-see-is-what-
   you-get) editing.  Editors such as Microsoft Word and Corel
   WordPerfect,
   WordPerfect provide not only WYSIWYG editing, but also semantic tags
   as well as outline-mode capabilities.  To that end, a Word template
   called 2-Word.template.rtf was created that supports authoring RFCs,
   as described in RFC-3285 RFC 3285 [6].  That version succeeded in enabling
   Word-based RFC editing, but did not support Word's outline mode
   renumbering capabilities.

   This document describes the properties and use of a revised Microsoft
   Word template (.dot) file that supports Internet Draft and RFC
   formatting, intended as an update to that of RFC-3285. RFC 3285.  This version,
   called 2-Word-v2.0.template.dot, addresses a number of issues with
   the preliminary version:

   o  redefines basic styles (Normal, Heading1, etc.) rather than
      creating new styles styles,

   o  updates the boilerplate according to BCP 78 78,

   o  uses more conventional methods for autonumbered references and
      figures, including support for name-based references (e.g.,
      "[Tou2005]")
      "[Tou2005]"), and

   o  supports direct output to a printer from the .doc source, as well
      as RFC-3285-style 'print to text' with post-processing on Windows-
      based PCs PCs.

   This document assumes familiarity with Microsoft Windows operating
   systems and the Word application.

2.  Use

   To use this template, double-click on it in Windows (it may work in
   MacOS and/or OpenOffice, but this has not been confirmed).  The
   result should be a 'new' document.  Do NOT open this document from
   within Word, e.g., via the File->Open menu; this will edit the
   template, rather than using the template to create a new template-based template-
   based document.

2.1.  Setting up your version Your Version of Word to edit Edit RFCs

   Unfortunately, Word does not have a way to save some useful settings
   in a template.  It may be useful to configure autoformatting to avoid
   using smart quotes or hyphens. This  However, this template is compatible
   with these
   features, however, features as its post-processor script translates these such non-
   standard character codes to into their RFC-compatible ASCII equivalents.

2.2.  Editing

   The template provides a number of styles for use (for details, see
   APPENDIX A: ).
   Appendix A).  Some are redefined internal styles, styles and some are new, as follow.
   follows.  Throughout the document, avoid the use of bold, italics, or
   any other character formatting, as well as any graphics, graphics or paragraph
   or table borders.  Smart hyphens and quotes need not be
   avoided, avoided and
   will be translated during post-processing.

   The current styles allow existing hyphens to break (wrap) across
   lines, but do not add hyphenation.  To insert a non-breaking hyphen,
   type <CTL-_> (control-underscore); this is particularly useful in
   URLs, which are more readable if not line-wrapped.

   Note that it is critical NOT to use any styles other than those
   provided by this template.

   o  Redefined internal styles for general use:

      Normal, Heading1-9, Caption, Header, Footer:

         Use in the normal fashion.  Tabs can be used as desired.

   o  New styles:

      RFC Title:

         For the document title only only.

      RFC Figure:

         For ASCII-art figures. single  Single spaced, kept-together kept together.

      RFC List Bullet:

         For bulleted-lists bulleted lists.

      RFC List Numbered:

         For numbered-lists. use numbered lists.  Use 'restart numbering' as desired for new
         list sequences sequences.

      RFC References:

         For normative and informative references.  Do not restart
         numbering for informative references.

         NOTE: references can use an alternate unnumbered style which that
         relies on use of Word's bookmark feature to set cross-reference
         tags.

      RFC App:

         For appendix titles, using "APPENDIX A: " "Appendix A." format.  Starts at the
         top of a new page.  If appendices are used, start the
         references (after appendices) at the top of a new page (insert
         'page
         break') break').

      RFC App H1-5:

         For appendix headings ("A.1. " ("A.1." format).

         NOTE: these headings will NOT auto-renumber when
         promoted/demoted in outline mode.

   o  Redefined styles used internal to the doc, but styles not generally accessed by users:

      TOC1-9:

         For table of contents entries.

      RFC Instructions:

         For instructions to authors.  These notes must be deleted.

      RFC H1 - no num:

         For unnumbered headings in end boilerplate text.

      RFC H1 - no TOC no num:

         For unnumbered, unlisted (in TOC) headings in front boilerplate
         text.

2.3.  Saving the File

   The template is provided as a Word 97-2003 ".dot" template; Word 2007
   uses an XML-based variant called ".dotx".  Word 2007 can use ".dot"
   templates in "Compatibility Mode".  If the file is saved in that
   mode, it has a ".doc" suffix; if saved in native Word 2007 mode, it
   has a ".docx" format.  It does not matter which saved file format is
   used.

2.4.  Generating Output

   This template supports printing similar output to both to regular
   printers (8.5x11" (8.5 x 11 inch paper) and as Internet-Draft/RFC compatible Internet-Draft/RFC-compatible
   text files.  Printing to a printer is designed for Windows XP and
   Vista and may work with earlier versions of Windows; it has not been
   tested with other OS's.  The template is currently in a Word 97-2003
   format (.dot); this can be used in "Compatibility Mode" in Word 2007.

   Printing to text is supported only for Windows at this time.  There
   is no current support for XML.  Details are provided as follows.

2.4.1.  Printing Direct to a Printer

   The template produces output direct to a printer that is line-for-
   line, page-for-page identical with the text-only version, with a few
   minor exceptions:

   o  Single and double quotes may be angled (left quote, right quote),
      rather than straight, depending on whether 'smart quotes' are
      enabled in Tools->Autocorrect options.

   o  Hyphens may print as an EM-dash em dash or EN-dash, en dash, depending on whether
      'smart hyphens' are enabled in Tools->Autocorrect options.

2.4.2.  Printing the Text File

   Printing to an ASCII text file is currently known to work only on
   Windows-XP and Windows-Vista PCs; appropriate ASCII-output drivers
   for MacOS or Unix boxes running OpenOffice are not currently known.

   To generate .txt output on a Windows-XP or Windows Vista PC, use a
   two-step process.  First, generate a .prn file by printing the
   document to a text-only printer.  Second, apply post-processing to
   clean up the text and apply 'new page' characters.

   Install the "Generic/Text Only" printer, as found in under "Generic" in
   the available print drivers list.  Configure the printer to save to a file,
   file or click 'save to file' when printing.  A printed file will have
   a .prn file suffix.

   The printed output needs to be run through a post-processor to
   generate valid Internet-Draft or RFC formatted text.  Run the .prn
   file through the post-processing as described in APPENDIX B: . Appendix B.  This
   includes:
   performs the following operations:

   o  Omit  Omits <CR>s (converts <CR><LF> to <LF> as well as omitting and omits bare
      <CR>s) <CR>s).

   o  Convert  Converts smart quotes and hyphens to their ASCII counterparts counterparts.

   o  Omits blank lines between the footer of one page and the header of
      the next, and inserts a <CTL-L> (form-feed) between the two.

   o  Checks for remaining illegal characters (not printable ASCII, CR,
      LF), as required required.

2.4.3.  XML Support

   There is no current support for XML in this template.  Although Word
   2003 provides XML support, its use is counterintuitive to most Word
   users.  XML fields are edited using a separate database editor,
   rather than in the native Word input screen.  Future support for XML
   is being considered for a future revision of this template.

3.  Changes from RFC 3285

   This document and the ".dot" template borrow heavily from RFC 3285
   [6].  Notably, all specifics of point sizes, tab locations, and the
   automatic date fields are directly from that template.  This document
   builds on that information as follows.

3.1.  Heading Styles

   This document redefines Normal, Heading1-9, Header, Footer, and
   Caption, rather than defining new RFC-named styles as in RFC 3285.
   The use of internal style names is required for proper operation of
   outline mode, notably when promoting/demoting sections of text with
   subsequent renumbering of headings therein.

   Note that this use of redefined standard styles is the common
   practice, both in Microsoft-supplied templates as well as templates
   from the IEEE and ACM, among others.

   Additional heading styles RFC App and RFC App H1-9 were added to
   support alternate numbering used in appendices, although these styles
   exhibit the previous deficiency of custom styles in outline mode
   (will not auto-renumber on promote/demote).

3.2.  References Style

   There are two different reference styles - -- RFC References, and RFC
   References Bookmark.  The former cross-references using numbers
   (e.g.,
   [1]), [1]); the latter is uses Word's bookmarking cross-reference
   features to support name/year cross-references (e.g., [Tou2005]).
   The latter is expected to be the preferred format for future IDs I-Ds and
   RFCs.

   RFC References is a body text paragraph style that autonumbers based
   on the "[1]" format.  Again, it is common practice, both among
   Microsoft-supplied templates as well as templates from the IEEE and
   ACM, to use autonumbered paragraphs in the body text for references.
   This differs from RFC 3285, in which references were inserted as
   endnotes, rather than as main body text.

   Putting references in endnotes has unexpected behavior.  In
   particular, the reference is defined by its first use as a citation, citation
   and is cross-referenced by subsequence subsequent citations.  Removing the first
   citation removes the reference entirely, despite other cross-
   references.  This is not the case with body text autonumbered
   paragraphs, which persist regardless of which cross-references are
   deleted.

   Note that Word does not provide a way to ensure that all RFC
   Reference paragraphs are cross-referenced, i.e., users can insert
   references which that are not cited.  This can be desired, however, e.g.,
   for bibliographies of supplemental material.

   RFC References Bookmark is a body text paragraph style that does not
   use autonumbering.  Currently, authors are expected to manually
   format their references using name-based tags between square brackets
   ("[]").  There is no required format, but a suggested format would
   use the first three letters of the first author, together with the
   four numbers of the document year, e.g., for this document's
   reference "[2]", the reference would now appear as:

   [Bra2004]   Bradner, S., "IETF Rights... Rights..."

   The author is expected to select the text of the reference
   "[Bra2004]" and Insert insert a Bookmark bookmark at that point with whatever name is
   convenient for the author.  It can then be cited as usual as a cross-
   reference to the bookmark: [Bra2004] [Bra2004].  Note that Word bookmark names
   must start with a letter, and may include numbers but not spaces.

   When two references collide, e.g., for two papers written by Bradner
   in 2004, a trailing lowercase letter should be used to distinguish
   them, e.g., [Bra2004a] and [Bra2004b].

3.3.  Boilerplate

   The boilerplate in this template was updated to conform with current
   RFC Editor requirements, notably BCP 78 rights statements, as well as
   pending guidelines for Internet Draft and RFC authors [2][3][5].

   The boilerplate is written in regular text, and can be easily edited
   by authors to keep the template up-to-date as BCP 78 is revised.

3.4.  Simplification

   Headers and footers use more conventional tabbing to control
   formatting, rather than tables.

   Users no longer need to avoid the use of smart quotes or hyphens;
   these are automatically translated to RFC-compliant ASCII characters
   during post-processing.

   A number of styles include grouping configuration, designed to
   provide more readable output.  In particular, all headings are "keep
   with next" to avoid widowed heading lines, and all list items,
   references, and figure lines are "keep together", together" to avoid in
   advertent inadvertent
   splitting across page boundaries.

3.5.  Ability to direct print Direct Print and direct view Direct View

   This template can print directly to a printer, generating output
   which that
   is line-for-line, page-for-page identical with the compliant ASCII
   text output, excepting minor formatting of hyphens and quotes.

   Further, this template can be previewed in File->Print Preview or
   View->Print Layout, again generating screen images which that are line-
   for-line, page-for-page identical with the compliant ASCII text
   output.  This allows true "WYSIWYG" WYSIWYG (what-you-see-is-what-you-get)
   editing and printing.

4.  Compatibility Issues

   There are no known compatibility issues at this time.  This version
   of the template was designed under Windows XP and Word 2002, and has
   also been tested under Windows Vista and Word 2007.  It is not yet
   known whether previous versions of Windows/Word are supported using
   this template.

   As noted in Sec. 3.1, this template redefines predefined styles,
   which is common practice.

5.  Security Considerations

   There are many security issues in the general use of Microsoft
   operating systems and applications.  This template is not known to
   expose any new security issues; it contains no macros as developed
   and deployed.  The author considered including the MD5 signatures of
   the current versions of the .dot template and .pl post-processor
   files.  The current processor .pl file is included in this document
   as an appendix.  The .dot file is updated to track the current
   requirements of the IETF boilerplate, so its MD5 signature cannot be
   included here, but is posted on our website for verification.

6. IANA Considerations

   There are no IANA issues in this document.

   The RFC Editor may remove this section prior to publication.

7.  Acknowledgments

   The author acknowledges the substantial efforts of the authors of the
   previous version of the Word template, Mike Gahrns and Tony Hain [6].
   This document is intended to build upon their work.  Thanks also to Lars-
   Erik
   Lars-Erik Jonsson for feedback on this template and post-processor
   script, as well as suggestions on making it more generic to support
   earlier versions of Windows, and to Jixiong Dong for finding an
   obscure bug in the formatting.

   This document was prepared using 2-Word-v2.0.template.dot.

APPENDIX A:

Appendix A.  Template configuration details Configuration Details

   The Word 97-2003 ".dot" template, compatible with Word 2007, consists
   of a set of default configuration settings, a set of modified and
   newly-defined styles, and an initial template of text.  This section
   in particular assumes familiarity with Microsoft Word configuration
   and modification of styles.  Note that use of the template does not
   require understanding this section; this merely documents the
   settings already in the ".dot" file.

A.1.  Configure

A.2. Configure styles Styles

   Modify paragraph styles as indicated.  In general use, only the
   redefined existing styles Normal, Heading1-9, Header, Footer, and
   Caption, and new styles RFC Figure, RFC References, RFC List Bullet,
   RFC List Numbered, RFC App, and RFC App H1-5 need be used by authors.

   Other styles, such as redefined TOC1-9, RFC Hidden, RFC H1 - no num,
   and RFC H1 - no TOC no num are used by the template, but are
   typically hidden in the styles list, and need not be explicitly
   applied by authors.

   All measurement units below are in points.  Change measurement units
   to points to set.

A.2.1.

A.1.1.  Redefine existing styles Existing Styles

   Redefine the Normal style first; all others are based on Normal Normal,
   except as noted.

   1. Normal: font Courier New, font size 12 point, next style Normal,
      line spacing EXACTLY 12 point, spacing before 0 pt, spacing after
      12 pt, indent left 21.6 pts, widow/orphan control, left tabs at
      every 3 spaces (1 space = 7.2 points, given 72 points/inch and 10
      characters/inch): 21.6, 43.2, 64.8, 86.4, 108, 129.6, 151.2,172.8,
      194.4, 216, 237.6, 259.2, 280.8, 302.4, 324, 345.6,367.2, 388.8,
      410.4, 432, 453.6, 475.2, 496.8

      (Note: 496.8.

      NOTE: 12 point fonts are 12 points tall, i.e., 6 lines/inch
      vertically; 12-point Courier is 10 characters/inch horizontally) horizontally.

   2. Heading 1-9: Normal + indent left 0 pt, hanging 21.6 pts, keep
      with next, set autonumbering as "1. ", "1.1. ", "1.1.1. ", etc.
      Note the space after the right-most period; type this in the
      number format

      "number format" field, and leave the "follow number with" field as
      'nothing' (click on the 'more' button to see this field if it is
      not already visible).

      NOTES:

      NOTE: change the autonumbering ONCE, ONCE and in ONE format, and format; in that
      format
      format, change all subsequent levels.

   3. TOC 1-9: Normal + paragraph flush, clear tabs, add new Right tab
      at 504 pts that includes a "..." leader.  Add indent left as
      follows: TOC 1: 21.6, TOC 2: 43.2, TOC 3: 64.8, TOC 4: 86.4, TOC
      5: 108, TOC 6: 129.6, TOC 7: 151.2, TOC 8: 172.8, TOC 9: 194.4 194.4.

   4. Header: Normal + space after 0 pts, next style Header, clear tabs,
      and add centered tab at 252 pts, tab right at 504 pts pts.

   5. Footer: Header + next style Footer Footer.

   6. Caption: Normal + centered, autonumbered "Figure #"

A.2.2. #".

A.1.2.  Add new styles

   Note: New Styles

   NOTE: "keep lines together" is optional for lists and references; it
   helps avoid breaking individual items across pages.

   1. RFC Figure: Normal + space after 0 pts, keep with next, keep lines
      together, next style RFC figure (also used for authors' addresses)
      addresses).

   2. RFC List Bullet - Bullet: Normal + custom bulleted, "o" bullet style,
      aligned at 21.6 pts, bullet tab after 43.2 pts, bullet indent at
      43.2 pts, next style RFC List Bullet, keep lines together together.

   3. RFC List Numbered - Numbered: Normal + custom numbered, "1. " number format,
      aligned at 21.6 pts, bullet tab after 43.2 pts, bullet indent at
      43.2 pts, next style RFC List Numbered, keep lines together together.

   4. RFC References: Normal + hanging 43.2 pts, outline level body
      text, remove tabs at 21.6 and 43.2 pts, custom numbering with
      format "[1]", numbering left aligned 21.6 pts, number tab space
      after at 64.8 pts, number text indent at 64.8 pts, next style RFC
      References, keep lines together (used for both normative and
      informational references)
      informative references).

   5. RFC References Bookmark: Normal + hanging 72 pts, no num, remove
      tabs less than 72 pts, keep lines together (used for both
      normative and informational references) informative references).

   6. RFC Title: Normal + space after 24 pts, centered (used for
      document title) title).

   7. RFC App: RFC H1 - no num + page break before, custom outline
      numbered, outline number style "APPENDIX A: ", "Appendix A.", outline level 1,
      follow number with nothing, outline number at 0 pts, outline
      indent text at 0 pts, (used for Appendix titles) titles).

   8. RFC App H1-5: RFC H1 - no num + paragraph level 2-6, custom
      outline numbered, outline number style "A.1. " "A.1." - "A.1.1.1.1.1. ", "A.1.1.1.1.1.",
      follow number with nothing, outline number at 0 pts, outline
      indent text at 0 pts, (link with RFC App at level 2-6), (used for
      Appendix heading levels)

A.2.3. levels).

A.1.3.  Hidden styles: Styles

   These are used for pre-formatted components or instructions, instructions and are
   configured to be hidden from the list of available styles.

   1. RFC H1 - no num: Normal + indent left 0 pts, outline Level 1, keep
      with next (used for base template trailer headers - -- Copyright,
      Acknowledgement, etc.)
      etc.).

   2. RFC H1 - no TOC nonum: Normal + indent left 0 pts, (outline level
      body text, as with Normal), keep with next (used for base template
      front matter headers - -- Abstract, Status, TOC header, etc.) etc.).

   3. RFC Instructions: Normal, character bold.  This style is not
      normally shown, shown and is used for instructions which that should be removed
      before publication.

A.3.

A.2.  Define page layout Page Layout

   Configure Page Setup as follows:

   4.

   1. Margins:

      Portrait orientation.

         Top:    72   pts
         Bottom: 60   pts (72 + 60 +_660 [55 lines] = 792 [11 in])
         Left:   36   pts (5 characters at 7.2 pts/char)
         Right:  57.6 pts (8.5"-7.2" = 1.3in = 93.6 pts - 36 for left)
         Gutter:  0   pts
         Header:  0   pts
         Footer:  0   pts

      If the error message "One or more margins are outside the
      printable area" message, appears, select Ignore.  This may depend on the
      printer currently selected.

   5.

   2. Paper size:

      Paper size "letter" "letter".

      Width:   612 pts
      Height:  792 pts (55 lines/page + 132 for top & bott and bottom margins)

   6.

   3. Layout:

      Different headers and footers on the first page page.

      Header:   72 pts from edge
      Footer:   60 pts from edge

A.4.

A.3.  Insert boilerplate Boilerplate

   See below for definitions of {ACDt}, {ACDy}, {AEM}, {AEY}, {AP} {AP}.

   First page header:

      {blank line}
      {blank line}
      <Working Group Name>{tab}<Initial.  Lastname>
      Internet Draft{tab}<Affiliation>
      Intended status: <e.g., Informational>{tab}{ACDy}
      Expires: {AEM}{AEY}
      {blank line}
      {blank line}

   Footer (same on first and subsequent pages):

      {blank line}
      {blank line}
      {blank line}
      <Lastname>{tab}Expires: {AEM} {ACDy}, {AEY}{tab}[Page {AP}]
      {blank line}

   The front text and end text are as specified in BCP 78 [2].  For
   Internet Drafts, the sentence declaring the expiration dates uses
   automatic fields as needed, as with the headers and footers.  Note
   that some of these fields will not be updated properly until the
   document has been saved and/or printed.

   Basic

   A basic document outline with examples are is provided in the Word
   template to demonstrate
   their use, the use of automatic fields, including a
   table of contents.

A.5.

A.4.  Automatic fields Fields

   Most of these are self-explanatory; the expiry month is set 6 months
   in advance.  The expiry year rolls-over (+1) (+1), if needed.  The expiry
   day is a copy of the current date.

   NOTE: expiry date can generate invalid dates, e.g., April 31,
   Februrary 30, etc.

   o  {AEM} means auto expiry month, and is a field code =

      { IF { SAVEDATE \@ "M" \* MERGEFORMAT } = 1
      July
        { IF { SAVEDATE \@ "M" \* MERGEFORMAT } = 2
        August
        { IF { SAVEDATE \@ "M" \* MERGEFORMAT } = 3
          September
          { IF { SAVEDATE \@ "M" \* MERGEFORMAT } = 4
            October
            { IF { SAVEDATE \@ "M" \* MERGEFORMAT } = 5
              November
              { IF { SAVEDATE \@ "M" \* MERGEFORMAT } = 6
                December
                { IF { SAVEDATE \@ "M" \* MERGEFORMAT } = 7
                  January
                  { IF { SAVEDATE \@ "M" \* MERGEFORMAT } = 8
                    February
                    { IF { SAVEDATE \@ "M" \* MERGEFORMAT } = 9
                      March
                      { IF { SAVEDATE \@ "M" \* MERGEFORMAT } = 10
                        April
                        { IF { SAVEDATE \@ "M" \* MERGEFORMAT } = 11
                          May
                          { IF { SAVEDATE \@ "M" \* MERGEFORMAT } = 12
                            June
                            "Fail" *\ MERGEFORMAT
   } *\ MERGEFORMAT } *\ MERGEFORMAT } *\ MERGEFORMAT } *\ MERGEFORMAT }
   *\ MERGEFORMAT } *\ MERGEFORMAT } *\ MERGEFORMAT } *\ MERGEFORMAT
   } *\ MERGEFORMAT } *\ MERGEFORMAT } *\ MERGEFORMAT }

   o  {ACDt} means auto current date, and is a field code =

      { SAVEDATE \@ "MMMM d, yyyy" }

   o  {ACDy} means auto current day, and is a field code =

      { SAVEDATE \@ "d " }
   o  {AEY} means auto expiry year, and is a field code =

      { IF { SAVEDATE \@ "M" \* MERGEFORMAT } < 7
           { SAVEDATE \@ "YYYY" \* MERGEFORMAT }
           { IF { SAVEDATE \@ "M" \* MERGEFORMAT } > 6
                { = { SAVEDATE \@ "YYYY" \* MERGEFORMAT } + 1
                \* MERGEFORMAT }
              "FAIL" \* MERGEFORMAT \* MERGEFORMAT
         } \* MERGEFORMAT
    }

   o  {AP} means auto page, and is a field code =

      { Page }

APPENDIX B: Post-processor script (perl)

Appendix B.  Post-Processor Script (Perl)

   #!/local/bin/perl
   # ------------------------------------------------------------------
   #                          2-Word-post-v2.0
   # Perl post-processor for MS Word RFC/Internet-draft template output
   #
   #                              J. Touch
   #                           touch@isi.edu
   #                      http://www.isi.edu/touch
   #
   #            USC Information Sciences Institute (USC/ISI)
   #               Marina del Rey, California 90292, USA
   #                         Copyright (c) 2004-2005
   #
   # Revision date: July 1, 2005
   # ------------------------------------------------------------------
   #
   # Copyright (c) 2004-2005 by the University of Southern California.
   # All rights reserved.
   #
   # Permission to use, copy, modify, and distribute this software and
   # its documentation in source and binary forms for non-commercial
   # purposes and without fee is hereby granted, provided that the
   # above copyright notice appear in all copies and that both the
   # copyright notice and this permission notice appear in supporting
   # documentation, and that any documentation, advertising materials,
   # and other materials related to such distribution and use
   # acknowledge that the software was developed by the University of
   # Southern California, Information Sciences Institute.  The name of
   # the University may not be used to endorse or promote products
   # derived from this software without specific prior written
   # permission.
   #
   # THE UNIVERSITY OF SOUTHERN CALIFORNIA MAKES NO REPRESENTATIONS
   # ABOUT THE SUITABILITY OF THIS SOFTWARE FOR ANY PURPOSE.  THIS
   # SOFTWARE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED
   # WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES
   # OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
   # ------------------------------------------------------------------
   #
   # usage:
   #        2-Word-post-v2.0.pl [inputfile.txt] > [outputfile.txt]
   #
   # function:
   #     removes indent on each line (blank print margin, typ. 5 chars)
   #        converts cr/lf to cr
   #     converts 'smart quotes' to regular quotes (single and double)
   #     converts 'smart hyphens' (EM-dash, EN-dash) (em dash, en dash) to regular hyphen
   #     omits blank lines between footer and next-page header
   #     inserts formfeed (ff) between footer and next-page header
   #     checks for illegal chars (not printable ASCII, cr, lf, ff)
   #     checks for page lengths exceeded
   #     checks for line lengths exceeded
   #     prints errors indicating page and line on that page
   #
   #        illegal character errors are posted to STDERR
   #
   #        returns the logical OR of codes indicating errors found:
   #                0x00 no error
   #                0x01 if any illegal characters found
   #                0x02 if any page length exceeds $maxpagelen
   #                0x04 if any line length exceeds $maxlinelen
   #
   # ------------------------------------------------------------------

   # ------------------------------------------------------------------
   # VARIABLES
   # ------------------------------------------------------------------

   $pagenum = 1;          # start on page 1, not 0
   $maxpagelen = 66;      # max lines per page

   $maxlinelen = 72;      # max chars per line

                          # specific error codes
   %codes = (
              'none' => 0x00,
              'char' => 0x01,
              'page' => 0x02,
              'line' => 0x04,
            );

   %codestrings = (
                    'none' => '(no error)',
                    'char' => 'invalid character code',
                    'line' => 'exceeded $maxpagelen lines per page',
                    'page' => 'exceeded $maxlinelen chars per line',
                  );

   $errorcode = $codes{'none'};

   $indentlen = -1;       # how many spaces to eat from the beginning
                          # of each line; ought to be 5. negative flag
                          # means it is not yet initialized

   $indentstr = "     ";  # until known otherwise, assume 5 spaces

   $killwhite = 1;        # flag kills space between footer, header
                          # start in 'between footer and header' mode,
                          # so eats all whitespace before the first line

   # ------------------------------------------------------------------
   # ERROR SUBROUTINE
   # ------------------------------------------------------------------
   sub printerr ($) {
     my ($errstring) = shift;

     print STDERR "ERROR: $codestrings{$errstring} ",
       "on line $linenum on page $pagenum of text input file\n";
     $errorcode |= $codes{$errstring};
     return;
   }

   # ------------------------------------------------------------------
   # MAIN
   # ------------------------------------------------------------------
   while ($line = <>) {
     $line =~ s/\r//g;         # remove Unix-style end-of-line
     # if this line is NOT empty, start printing again (see below)
     if ($line !~ /^\s*$/) {
       $killwhite = 0;
       if ($indentlen < 0) {
         # discover margin indent
         $line =~ /^((\s)*)/;
         $indentstr = $1;
         $indentlen = length($indentstr);
       }
     }
     # remove the margin indent
     $line =~ s/^($indentstr)//;
     # change special hyphens, quotes to regular ones
     $line =~ tr/\221\222\223\224\226\227/\'\'\"\"\-\-/;

     # print unless we're between the end of one page
     # and the beginning of the next
     if ($killwhite != 1) {
       # check to see if we have any invalid characters left
       # 012 = new line, 014 = form feed, 015 = carriage return
       # 040-176 = printable ASCIIs
       if ($line !~ /^([\012\014\015\040-\176])*$/) {
         printerr('char');
         # note - -- we don't stop here, so we can find all the
         # unprintable characters in one pass
       }
       $linenum++;
       if ($linenum > $maxpagelen) {
         printerr('page');
       }
       if ($#line > $maxlinelen) {
         printerr('line');
       }
       print $line;
     }
     # check to see if this is the end of a page;
     # if so, then print a form feed (ctl-L), and
     # kill the printing of subsequent empty lines
     if ($line =~ /\[Page \d+\]\s+$/) {
       print "\f\n";
       $killwhite = 1;
       $linenum = 0;
       $pagenum++;
     }
   }
   exit($errorcode);

8. References

8.1. Normative References

   (None).

8.2.

Informative References

   [1]   Reynolds, J., Ed., and R. Braden, R., (eds.), Ed., "Instructions to Request
         for Comments (RFC) Authors," (work Authors", Work in progress), Progress, August 2004.

   [2]   Bradner, S., (ed.) Ed., "IETF Rights in Contributions", BCP 78, RFC
         3978, March 2005.

   [3]   Bradner, S., (ed.) Ed., "Intellectual Property Rights in IETF
         Technology", BCP 79, RFC 3979, March 2005.

   [4]   RFC Editor formatting tools web page, "http://www.rfc
         editor.org/formatting.html". Editor, "Formatting RFCS",
         http://www.rfc-editor.org/formatting.html.

   [5]   IETF, "Guidelines to Authors of Internet Drafts".  Available as
         1id-guidelines.txt at http://www.ietf.org http://www.ietf.org.

   [6]   Gahrns, M. and T. Hain, "Using Microsoft Word to create
         Internet Drafts and RFCs," RFCs", RFC 3285, May 2002.

   [7]   Rose, M., "Writing I-Ds and RFCs using XML," XML", RFC 2629, June
         1999.

Author's Addresses Address

   Joe Touch
   USC/ISI
   4676 Admiralty Way
   Marina del Rey, CA 90292-6695
   U.S.A.

   Phone: +1 (310) 448-9151
   Fax:   +1 (310) 448-9300
   Email:
   EMail: touch@isi.edu

Full Copyright Statement

   Copyright (C) The IETF Trust (2008).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, 78 and at http://www.rfc-editor.org/copyright.html,
   and except as set forth therein, the authors retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
   THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
   OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
   THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property Statement

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.